Teltonika TRB140 4G LTE Router | Industrial Ethernet Gateway | High-Speed Cellular Network | D4364 Model

Specifications

• Mobile module 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
• Status Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP Bytes sent/received, connected band, IMSI, ICCID.
• SMS/Call SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, Call utilities
• USSD Supports sending and reading Unstructured Supplementary Service Data messages
• Black/White list Operator black/white list
• Band management Band lock, Used band status display
• APN Auto APN
• Bridge Direct connection (bridge) between mobile ISP and device on LAN
• Passthrough Gateway assigns its mobile WAN IP address to another device on LAN
• Multiple PDN Possibility to use different PDNs for multiple network access and services (optional)

• LAN 1 x RJ45 port, 10/100/1000 Mbps, supports auto MDI/MDIX crossover
• NETWORK
• Network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SMTP, SSL v3, TLS, PPP, PPPoE, SSH, DHCP, SNMP, MQTT, Wake on LAN (WOL)
• Routing Static routing
• Connection monitoring Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
• Firewall Port forwards, traffic rules, custom rules
• DHCP Static and dynamic IP allocation
• QoS / Smart Queue Management (SQM) (planned) Traffic priority queuing by source/destination, service, protocol or port
• DDNS Supported >25 service providers, others can be configured manually
• SSHFS Possibility to mount remote file system via SSH protocol

• Authentication Pre-shared key, digital certificates, X.509 certificates
• Firewall Pre-configured firewall rules can be enabled via the WebUI, unlimited firewall configuration via CLI; NAT; NAT-T
• Attack prevention DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
• Mobile quota control Set up custom data limits for SIM card
• WEB filter Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
• Access control Flexible access control of TCP, UDP, ICMP packets, MAC address filter

• OpenVPN Multiple clients and a server can run simultaneously, 12 encryption methods
• OpenVPN Encryption DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
• IPsec IKEv1, IKEv2, supports up to 5 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)
• GRE GRE tunnel
• PPTP, L2TP Client/Server services can run simultaneously, L2TPv3 support
• ZeroTier ZeroTier VPN
• WireGuard WireGuard VPN client and server support

• MODBUS TCP SLAVE
• ID filtering Respond to one ID in range [1;255] or any
• Allow remote access Allow access through WAN
• Custom registers MODBUS TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend MODBUS TCP slave functionality
• MODBUS TCP MASTER
• Supported functions 01, 02, 03, 04, 05, 06, 15, 16
• Supported data formats 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

• Gateway Allows sending commands and receiving data from MODBUS Master through the MQTT broker
• DNP3
• Supported modes TCP Master, DNP3 Outstation

• Protocol HTTP(S), MQTT, Azure MQTT, Kinesis

• WEB UI HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, system log, kernel log
• FOTA Firmware update from sever, automatic notification
• SSH SSH (v1, v2)
• SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET
• Call Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer
• TR-069 OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
• MQTT MQTT Broker, MQTT publisher
• SNMP SNMP (v1, v2, v3), SNMP trap
• JSON-RPC Management API over HTTP/HTTPS
• MODBUS MODBUS TCP status/control
• RMS Teltonika Remote Management System (RMS)

• Cloud of Things Allows monitoring of: Device data, Mobile data, Network info, Availability
• ThingWorx Allows monitoring of: WAN Type, WAN IP Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
• Cumulocity Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP
• Azure IoT Hub Can send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server

• CPU ARM Cortex-A7 1.2 GHz CPU
• RAM 128 MB (50 MB available for userspace)
• FLASH storage 512 MB (200 MB available for userspace)

• WEB UI Update FW from file, check FW on server, configuration profiles, configuration backup
• FOTA Update FW/configuration from server
• RMS Update FW/configuration for multiple devices
• Keep settings Update FW without losing current configuration

• Operating system RutOS (OpenWrt based Linux OS)
• Supported languages Busybox shell, Lua, C, C++
• Development tools SDK package with build environment provided

• Configurable I/O 2 x Configurable Inputs/Outputs. Digital input 0 - 5 V detected as logic low, 8 - 30 V detected as logic high. Open collector output, max output 30 V, 300 mA (not available in TRB140*2****)
• Output control HTTP POST/GET, Schedule
• Events SMS, EMAIL
• I/O juggler Allows to set certain I/O conditions to initiate event

• Connector 4 pin industrial DC power socket
• Input voltage range 9 – 30 VDC (4 pin industrial socket), reverse polarity protection, surge protection >33 VDC 10us max
• PoE (passive) Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards
• Power consumption < 5 W

• Ethernet 1 x RJ45 port, 10/100/1000 Mbps
• I/Os 2 x Configurable I/O pins on 4 pin power connector (I/O not available in TRB140*2****)
• USB 1 x Virtual network interface via micro USB
• Status LEDs 3 x connection type status LEDs, 5 x connection strength LEDs, 2 x LAN status LEDs, 1x Power LED
• SIM 1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V
• Power 1 x 4 pin DC connector
• Antenna 1 x SMA for LTE
• Reset Reboot/User default reset/Factory reset button

Physical Specifications

• Casing material Aluminium housing
• Dimensions (W x H x D) 74.5 x 25 x 64.4 mm
• Weight 134 g
• Mounting options Bottom and sideways DIN rail, Flat surface
• OPERATING ENVIRONMENT
• Operating temperature -40 °C to 75 °C
• Operating humidity 10 % to 90 % non-condensing
• Ingress Protection Rating IP30
• REGULATORY & TYPE APPROVALS
• Regulatory CE/RED, EAC, RoHS, WEEE

• Standards Draft ETSI EN 301 489-1 V2.2.0, Draft ETSI EN 301 489-19 V2.1.0, Draft ETSI EN 301 489-52 V1.1.0
• ESD EN 61000-4-2:2009
• RS EN 61000-4-3:2006 + A1:2008 + A2:2010
• EFT EN 61000-4-4:2012
• Surge protection EN 61000-4-5:2014
• CS EN 61000-4-6:2014
• DIP EN 61000-4-11:2004

• Standards EN 300 511 V12.5.1, ETSI EN 301 908-1 V11.1.1, ETSI EN 301 908-1 V11.1.2, EN 301 908-2 V11.1.2, ETSI EN 301 908-13 V11.1.2

• Standards IEC 62368-1:2014(Second Edition), EN 62368-1:2014+A11:2017
• EN 50385:2017
• EN 62232:2017